MAINTENANCE
1. Start the engine and let it idle for a few minutes. Make sure
the red low oil pressure indicator goes off. If the light re-
mains on, stop the engine immediately.
Oil drain plug torque: 18 lb-ft (25 N-m)
Running the engine with insufficient oil pressure can
cause serious engine damage.
2. Stop the engine and put the motorcycle on its center stand
(or a suitable service lift) on level ground.
3. Remove the oil drain bolt
1
, and drain the engine oil into a
suitable container.
4. Reinstall the drain plug, and tighten it to the specified torque.
5. Remove the oil filler cap. Add oil to the engine per the
specified amount, and reinstall the oil filler cap.
6. Verify that the oil level reaches the upper mark in the oil
level window
2
.
7. Start the engine and let it idle for 2 - 3 minutes.
8. Stop the engine and check the oil level in the oil level win-
dow, on the right engine cover (with the motorcycle parked
on the center stand, on level ground).
9. Adjust the oil level as required (so the level reaches the
upper mark in the oil level window
2
). Replace the oil
filler cap and inspect for any leaks.
1
1
1
1
1
2
2
2
2
2
