10
CONTROLS & FEATURES
KEYS
Your Quannon motorcycle is supplied with two identical igni-
tion switch keys that operate the ignition switch, the steering
lock, the fuel filler cap, and the helmet lock.
Both keys have a unique code stamped on the tab supplied
with the keys. For security reasons this code is not stamped
on the motorcycle or recorded in the vehicle's basic docu-
mentation. Since the code is required if you need replace-
ment keys, record these important codes in the boxes pro-
vided on the inside, rear cover of this Owner's Manual.
NOTE: Apply a lock lubricant with antifreeze properties
to key openings if the outside air temperature drops be-
low freezing (32
o
F, 0
o
C).
IGNITION SWITCH & STEERING LOCK
To operate the ignition switch and the steering lock:
1
1
1
1
1
“OFF”: In this position, the motorcycle’s electrical system is
off, and the engine cannot be started. The key can
be removed from the ignition switch in this position.
2
2
2
2
2
“ON”:
In this position ,the motorcycle’s electrical system is
on, and the engine can be started. The key cannot
be removed from the ignition switch in this position.
3
3
3
3
3
“LOCK”: In this position, the ignition switch locks the steer-
ing of the motorcycle. The key can be removed
from the ignition switch in this position.
1
1
1
1
1
2
2
2
2
2
Key code
