Switch Access
27
perform operations.
Table 15 CLI Commands
View
Command
Description
User view
SWITCH>enable
Enter the management view.
Management view SWITCH#show interface
Query the IP address of the switch.
Management view SWITCH#show version
Query the version of the switch.
Management view SWITCH#reboot
Restart the switch.
Management view SWITCH#load default
Restore the factory default settings
Management view SWITCH#config terminal
Enter the configuration view.
7.2 Access through Telnet
Step 1: Connect the network port of the PC to the RJ45 port of the switch with an RJ45-RJ45
cable.
Step 2: Enter "telnet
IP address
" in the Run dialog box. For example, if the IP address of the
switch is 192.168.0.2 (default IP address of a Kyland switch), enter "telnet
192.168.0.2" in the dialog box.
Figure 28 Access through Telnet
Step 3: Click OK. The Telnet CLI is displayed. Then you can enter commands (as shown in
Table 15) to perform operations.
7.3 Access through Web
Step 1: Connect the network port of the PC to the RJ45 port of the switch with an RJ45-RJ45
cable.
