Cable Connection
19
Table 11 Pin Definitions of 5-Pin 5.08mm-Spacing Plug-in Terminal Block
No.
DC Definition
AC Definition
1
PWR1: +
PWR1: L
2
PWR1: -
PWR1: N
3
PGND
PGND
4
PWR2: -
PWR2: N
5
PWR2: +
PWR2: L
Wiring and Mounting
Step 1: Ground the device properly according to section 4.5.
Step 2: Remove the power terminal block from the device.
Step 3: Insert the power cable into the power terminal block according to Table 11 to fix the
power cable.
Step 4: Insert the terminal with the connected cable into the terminal block on the device.
Step 5: Connect one end of the power cable to an external power supply system (with the
allowed power range). If the power LED on the front panel of the switch turns on, the
power supply is connected properly.
Figure 23 Cable Connection of 5-Pin 5.08mm-Spacing Plug-in Terminal Block
Wiring and Mounting should meet following specifications.
Table 12 Wiring and Mounting Specifications
Terminal Type
Required Torque
Wire Range (AWG)
Terminal Block Plug
4.5-5.0 lb-in for WEIDMUELLER terminal block
12-24
5-7 lb-in for PHOENIX terminal block
