Cable Connection
14
Caution:
A laser is used to transmit signals in fiber cables. The laser meets the requirements of level 1
laser products. Routine operation is not harmful to your eyes, but do not look directly at the
100Base-FX Ethernet port when the switch is powered on.
4.3 1000Base-X, 10/100/1000Base-T(X) SFP Slot
1000Base-X, 10/100/1000Base-T(X) SFP slot (Gigabit SFP slot): You can enable data
transmission only after inserting an SFP optical/electrical module into the slot and
connecting cable properly. The following table lists the Gigabit SFP optical/electrical
modules (optional) supported by the series switches.
Table 8 Gigabit SFP Optical/Electrical Modules for SICOM3306
Model
Interface
MM/
SM
Connector
Center Wavelength
(CWL)
Transmission
Distance
IGSFP-M-SX-LC-850-0.55 1000Base-X port
MM LC
850nm
0.55km
IGSFP-S-LX-LC-1310-10
1000Base-X port
SM LC
1310nm
10km
IGSFP-S-LH-LC-1310-40
1000Base-X port
SM LC
1310nm
40km
IGSFP-S-ZX-LC-1550-80
1000Base-X port
SM LC
1550nm
80km
IG-FSFP-M-LX-LC-1310-2 100Base-FX port
MM LC
1310nm
2km
IG-FSFP-S-LX-LC-1310-10 100Base-FX port
SM LC
1310nm
10km
IGSFP-10/100/1000BASE-
T-RJ45
10/100/1000Base-T(
X) port (self-adaptive)
--
RJ45
connector
--
--
4.3.1 Gigabit SFP Optical Module
Figure 13 Gigabit SFP Optical Module
Gigabit SFP optical module is equipped with LC connector, and each port consists of a TX
