K U N S T S T O F F – V E R B I N D U N G S – T E C H N I K G M B H
Stand: Okt-12
Werkering 6 – 33609 Bielefeld – Tel. 0521 / 93207-0 – Fax 0521 / 93207-11
Kap. 7 – Seite 7
7.3.2
Connections
The screw connections for the EWS converter(s) are on the front side of the
EWS compensation.
1
Screw connection for the EWS converter(s)
(ferrule fitting Ø 10 mm)
Photo 7: Screw connection
The connection of the compensation to the converter is performed optional-
ly using special, flexible EWS tubed cable or with copper pipe.
The following connections and components are on the rear side of the com-
pensation.
Photo 8: Rear side of the compensation MF 1000
1.
Start socket, the EWS generator can be activated using this by an up-
stream control unit with a voltage-free contact.
(see 7.6.7 Start circuit diagram for pin assignment)
2.
16-pole male connector for the EWS connection cable
3.
LT 100 flow rate monitor
4.
Quick-release connections for the coolant [inflow and outflow]
5.
Fine filter
6.
Type plate with serial number