KVH Industries FB250, Installation Manual

Page: 80 / 202

Chapter 4: Hardware interfaces
DC power input 67
4444
H
a
rd
w
a
re
in
te
rf
a
ce
s
4.3 DC power input
4.3.1 Overview
The DC power input for the terminal is a 10.5 - 32 V DC; 14 A - 5.5 A input with
a remote on/off function. The input is protected against reverse polarity.
The power connector is a D-sub connector placed in the connector panel.
For information on power recommendations and how to connect, see
Connecting power on page 53.
For TracPhone 19” Rack Terminal:
To be able to use the power switch on the
front panel of the terminal you must connect the remote on/off pins in the DC
connector to the terminal block in the right side of the connector panel. For
further information, see
19” rack version only: Connecting to the power switch
on the front on page 61.
Important
On the TracPhone 19” Rack Terminal, do
not
connect power to
the terminal block in the right side of the connector panel! The
terminal block is only for connection of the remote on/off
signal.