KVH Industries FB250, User Manual

Page: 63 / 268

Chapter 3: Operating the system
Using a phone or fax machine 51
3333
O
p
er
ati
n
g t
h
e
sy
st
em
Using the local exchange
Before you can use the local exchange, you must enable it in the web interface
of the terminal. For information on how to set up the local exchange function,
see
Setting up the local exchange function on page 125.
With local exchange enabled, do as follows to call a specific handset:
1. Call the mobile number of the terminal.
For details, see the previous section.
2. Listen to the recorded message.
You now have three options:
• If you know the local number of the phone, dial the number followed
by #.
Example: To call phone number 0301, dial 0301 # . Your call is then
transferred to phone number 0301.
• If you don’t know the number of the phone, you can call the default
phone by dialing
* .
• If you dial nothing, you are transferred to the default phone after a
time-out period.
Receiving a voice mail message
If a call to the TracPhone system is not answered the caller can leave a voice
mail message with Inmarsat’s voice mail service. Then an SMS is sent to the
TracPhone messaging system to alert you that there is a voice message. The
SMS has the contents:
• Number called from
• Date and time the voice mail message has been received
• Number to call to listen to the voice mail message
To see that a new SMS has arrived you open the web interface. For further
details see
Receiving a message on page 100.
Note The Local exchange function is not available if you have enabled
Multi-voice.