KVH Industries FB250, User Manual

Page: 71 / 268

Chapter 3: Operating the system
Using a phone or fax machine 59
3333
O
p
er
ati
n
g t
h
e
sy
st
em
Sending a fax message to the terminal
To send a fax message to the terminal, dial
+ <Mobile number> #
• + is the international call prefix
1
used in front of the country code for
international calls.
• Mobile number . The first part of the mobile number is always 870, which is
the “country code” for the BGAN system. Use the 3.1 kHz mobile number if
you are calling a G3 fax and the UDI number if you are calling an ISDN G4
fax connected to the terminal. If the mobile numbers are listed in the web
interface, you can look them up as follows:
Connect a computer, access the web interface and select PHONE BOOK >
Mobile numbers . For further information, see Viewing and editing the
mobile numbers on page 92.
If the mobile numbers are not available in the web interface, see your
airtime subscription.
Receiving a fax message
An analogue fax machine connected to the terminal can only receive a fax
with 3.1 kHz Audio. Refer to
Selecting the incoming call type on page 47.
An ISDN G4 fax machine connected to the TracPhone FB500 terminal can only
receive a fax with UDI (unless it is in G3 mode). TracPhone FB250 does not
support UDI and cannot be used with G4 fax.
1. The plus sign indicates the code required to dial out of one's country code area,
such as 00 in most of Europe, 011 in the United States, and other short codes in
other parts of the world.