Kverneland CLC Evo User Manual Download

Page: 44 / 86

Hitching

Folding machines

Hitching



Move the tractor adjacent to the machine.



Hitch the machine to the tractor.



Adjust the lower arms of the tractor so that the machine has a
certain amount of play to both the right and left.



If necessary, clean the hydraulic couplings in order to prevent
introducing impurities into the circuit.



Connect the hydraulic hoses to the tractor.

•

A dual effect for folding.

•

A dual effect for depth control.

Retract the front

struts



Raise the machine until the struts no longer touch the ground.



Remove the spindles (A) of the struts to unlock them.



Raise the struts to place them in working position.



Lock the struts using the pins.

CAUTION

Risk of shocks

The struts must be carefully stored in order to avoid any shock
when folding or unfolding the machine. The struts must be in the
retracted position during folding and unfolding steps.

Summary of Contents for CLC Evo























































































Search results

Summary of Contents for CLC Evo

Reviews:

Related manuals for CLC Evo

Brands by name

Popular brands

Kverneland CLC Evo, User Manual

Search results

Summary of Contents for CLC Evo

Reviews:

Related manuals for CLC Evo

Brands by name

Popular brands