Transport
48
Respect the legal
transportation width
Tipping elements
Make sure that you fold back and lock all the tipping elements on
the machine.
Fixed machines
equipped with edging
discs [+]
The two exterior edging discs must be retracted when driving on the
road.
Remove the pin locking the lateral adjustment shaft (A).
Remove the side adjustment shaft.
Grasp the end of the lateral arm (B).
Move the lateral arm to the vertical position. This position
corresponds to the transport position.
Grasp the end of the round transverse tube (C) to relieve the
assembly.
Push the edging disc tube home.
→
An abutment now prevents the tube from rotating.
Engage the adjustment shaft (A) in the socket to lock the transport
position (D).
Insert the pin to lock the shaft.
Folding machines
Fold the machine.
Activate the folding function.
Disconnect the folding function hydraulic hoses from the tractor to
avoid any accidental operation during transport.
Signaling and lighting
All lights, reflectors, license plates and signaling or warning panels on
the tractor must be perfectly visible.
If this is not possible, you must install lights and a license plate on the
machine.
Place the rear signaling panels in the transport position.
A
B
C
D
B
A
A
Transport position
B
Working position
Summary of Contents for CLC Evo
Page 8: ...Safety 8 ...
Page 9: ...Safety 9 Folding machines ...
Page 10: ...Safety 10 ...
Page 72: ...Maintenance 72 5 00 folding chassis Double tube roller bar ...
