Kverneland CLC Evo User Manual Download Page 52

Page: 52 / 86

Adjustments

MPORTANT

NOTE

Never turn the machine with the tool in the ground.

Adjustment of the

working depth

The working depth of the stubble tines is controlled by the rear roller
and/or by the optional depth control wheels at the front of the machine.

Perforated plates

On machines fitted with a parallelogram system, the working depth is
adjusted on the perforated plates, as determined by the lower shaft.

The sticker opposite is pasted onto the perforated plates to make it
easier to adjust the working depth.

•

The holes in the light gray part are used to adjust the machine for
surface work.

•

The holes in the gray part are used to adjust the machine to work
at a medium depth.

•

The holes in the dark gray part are used to adjust the machine for
deep work.

WARNING

•

Comply fully with safety instructions.

•

Keep a safe distance during handling.

Danger of crushing and entrapment.

Upper shaft

Perforated plate

Lower shaft

Summary of Contents for CLC Evo























































































Search results

Summary of Contents for CLC Evo

Reviews:

Related manuals for CLC Evo

Brands by name

Popular brands

Kverneland CLC Evo, User Manual

Search results

Summary of Contents for CLC Evo

Reviews:

Related manuals for CLC Evo

Brands by name

Popular brands