manualshive.com logo in svg

Kval Edge-SS, Operation Manual

Share
Download
Kval Edge-SS Operation Manual Download Page 55

About Door Job Creation

2-22

KVAL Manual

About the Selected Feature Details Menu (Child Level)

Features are created by adding children to a feature group. All features are specific cuts that can 
be made on a door. Feature Types for this line include Rectangle, Circle, Hinge, TeeShape, and 
LiteCutout, each with their own parameters and validation requirements.

Note: 

The example below is the parameter of the Hinge Cut form the previous page. 

The example below details the parameters of the hinge cut. Predrill locations 
are also included in the example.

Feature Name: 

Name of The Fea-

ture Under the Group.

Feature Type: 

Select type of cut: 

• Circle

• FaceCircle

• FaceRectangle

• Hinge

• Rectangle

• TeeShape

• Face Profile

• LiteCutout 

(

See “About the LiteCutout Feature 

Detail (DL-NCD Only)” on page 2-37.

)

Door Side: 

Select Door Side:

• Bottom End

• Top End

• Hinge Edge

• Lock Edge

• Hinge Jamb

• Lock Jamb

Data Table: 

Parameters of the cut. 

Includes Hinge Predrill locations.

Manage Augmentations: 

Add augmentations 

to the created Feature. Augmentations are 
created at the factory to ad to common cuts.

Summary of Contents for Edge-SS

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands