manualshive.com logo in svg

Kval Edge-SS, Operation Manual

Share
Download
Kval Edge-SS Operation Manual Download Page 130

Front View of the Edge-SS

KVAL Operation Manual

5-4 

Front View of the Edge-SS

At the front of the machine the operator controls the door through the process. This includes load-
ing templates of the cut to be performed, controlling the path of the door, positioning the door, and 
feeding the door thorough to the next machine. The 

Figure below

 identifies major assemblies and 

controls.

FIGURE 5-1. 

Front view of the Edge-SS Machine 

Cutting Head: 

Work Horse. Servo 

Driven Tool Carriage to rout and drill 
the edge of a door.

Operator Station:

The Operator’s Station includes a 
touch screen and keyboard to run 
the program that operates the 
machine.

Note:

 Multiple machine controls 

may combined in one station 
(Machine Combinations are Cus-
tomer Definable)

Foot Pedal Controls:

Door Stops

Door Clamps

Emergency Stop

Fence, Clamps:

The Fence acts like a reference to 
align the door. The clamps hold the 
door in place in processing.

Stops:

 Stops are located both 

sides of the table and are 
identified by software.

Machine Controls

Edge Pos Lights

Start Seq. Button

Edge Toggle

‘Door Finished

Scanner

Door Stops

Door Clamps

Emergency Stop

Summary of Contents for Edge-SS

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands