manualshive.com logo in svg

Kval Edge-SS, Operation Manual

Share
Download
Kval Edge-SS Operation Manual Download Page 102

About the Edge SS Manual Servo Control Tab

KVAL Operation Manual

3-18 

About the Edge SS Manual Servo Control Tab

Select the 

Manual Servo Control Tab

 to jump to the screen. At this screen, the 

Main Head

 and 

Table 

servo motors can be moved manually. Table controls include moving the 

Feeler 

and the 

Feeder

.

 

FIGURE 3- 12. 

Edge-SS Manual Control Screen

Table Feed 
Control is an 
Optional Fea-
ture

About the Edge-SS Feeler Servo Controls

These controls operate the 

Thickness Feeler

. The feeler uses encoder technology to accu-

rately measure the thickness of a door. For information about the Feeler, see

“About the 

Door Length Feeler” on page 7-8

LengthFeelerEncoder:

 Dis-

plays the Count Position of the 
Feeler Encoder.

Feeler Forward: 

Press 

and Hold to move the 
feeler forward. (Toward 
from the door)

Feed Reverse:

 Press and 

Hold to move the feeler in 
reverse. (Away from the 
door)

Feeler Retracted: 

Press 

to toggle feeler contacts to 
and away from the door.

Summary of Contents for Edge-SS

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands