Kval Edge-SS Operation Manual Download

Page: 39 / 152

About the Libraries

2-6

KVAL Manual

Around the Door Job Library Screen

Below is a list of highlights about this screen.

• Selecting a file from the table leads to the

Door Job

Creation screen.

• The

Door Job

Library contains all the files in the selected database.

• The

Door Job

files contains all the information to create a door.

• Files support revisions.

Around the Door Data Library Screen

Below is a list of highlights about this screen.

• Selecting a file from the table leads into the Door Data Creation screen

• The Door Data Library contains the specifications about an unprocessed door.

• No shape cutting information is at this screen.

• Files can be saved and be attached to the many

Door Job

files.

• Files support revisions.

Summary of Contents for Edge-SS

























































































































































Search results

Summary of Contents for Edge-SS

Reviews:

Related manuals for Edge-SS

Brands by name

Popular brands

Kval Edge-SS, Operation Manual

Search results

Summary of Contents for Edge-SS

Reviews:

Related manuals for Edge-SS

Brands by name

Popular brands