Kval DL-2, Instruction Manual

Page: 21 / 68

DL-2 Door Light CutOut Machine
When you first receive the machine, you will notice that there will be (10) 48”
long, 1” diameter shafts with 60 set collars. The positioning of the set collars
determines the configuration of your cutout. Once you have positioned the set
collars, mark the shaft to identify which cut out it does.
•
Loosen the set collars and position them in the approximate position of the
dimensions of your light cutout.
•
Tighten the set collars.
•
Make a test cut, and adjust as necessary. If you have templates for
rectangular lights.
•
Place the template in the DL-2.
•
With power off guide the carriage along the pattern.
•
At the four corners of the light pattern position a set collar, and tighten.
•
Remove the template and make a test cut.
•
Adjust as necessary.