3,000 Cycle Maintenance Steps
5-7
KVAL 994-X Operation/Service Manual
3,000 Cycle Maintenance Steps
Follow Lockout Tagout procedures,
Inspect Feed Belts
Inspect feed belts for proper tension or
damage.
Check belts for cuts and nicks.
Belts can stretch over time. Check for
looseness. A rule of thumb is to pull
belt, if belt moves too freely, then
replace belt.
Belts can become slick from use, lesson-
ing traction on door. Check belts for
slickness or door slippage.
Inspect Screw Drop Tubes on Six Shooter
Inspect screw drop tubes:
• for kinks
• cracks
• wear from rubbing
• Ensure tube clamps are tight
Inspect all Photo Eyes
Inspect all photo eyes secure and tight.
Check Connection to Photo Eye
Check Nut that
attaches Photo
Eye to Machine
Summary of Contents for 994-X
