Section 14—Options
14.4
14.2 OPTIONS EXAMPLES
Using the above options list, add all the numbers for the
options you want active. NOTE: default options, such as
MPH and Patrol Blank, have a value of zero (0).
To enter the Options Menu mode, power the unit off, then
press and hold the POWER switch until the power-on
sequence stops. Press the TEST switch until OPt appears in
the TARGET window and a number appears in the
LOCK/E.T. window. This number may be zero.
Using the UP and DOWN arrows (AUDIO and RANGE
switches), increase or decrease the number for the value
needed. If you wish to make these changes permanent (until
changed again), depress the LOCK/REL switch once.
When the options have been accepted, the unit will
automatically return to radar mode.
EXAMPLE: The operator wishes to permanently change
the operation of the unit to the following: Automatic
Unlock = 1, no Patrol Blank = 8, toggle Fastest function =
16, Gateway (unencrypted) output = 32 and MPH = 0.
These numbers are added for a total of 57. When the menu
function is entered (see above), use the UP and DOWN
arrows to adjust the number shown in the LOCK/E.T.
window until 57 is shown. The operator would then depress
the LOCK/REL switch one time and the changes would be
accepted and used every time the radar is powered up.
