Section 3—Inspection & Mounting
__________________________________________________
3.6
3.2.4 REAR ANTENNA MOUNTING
1. Place the antenna on the rear-mounting bracket.
2. Follow the procedure for determining any fan
interference per Sec. 3.2.3, steps 4-6. Set the
Directional Golden Eagle II for stationary mode ALL,
rear antenna.
Stationary Mode
Rear Antenna
3. After the optimum position has been located (and marked
per Sec. 3.2.3 Step 6), permanently attach the mount to
the rear window using the adhesive provided.
4. Position the antenna cable behind the rear seat and under
the rear floorboard, then route up to the logic unit and
connect. This method of mounting will minimize the
antenna from moving around in the vehicle should it
break loose in an accident. It should also prevent
anyone from using the cable as a weapon against the
officer.
5. Position the antenna parallel to the ground and straight
down the roadway.
3.2.5 SPEEDOMETER PULSE CABLE
INSTALLATION
1. The speedometer pulse cable has a two-conductor plug
at one end and no plug at the other end. The plug
connects into the “SPDOMTR” connector on the rear
panel of the Directional Golden Eagle II.
