Kurzweil SP7 Grand Musician'S Manual Download Page 22

Page: 22 / 64

For each zone, you can set Activate/Program Type/Program/FX Slot/ARP Slot/Transpose/Pan/
Volume/Destination.

Zone Edit

Changes the on/off state of the selected Zone.

Activate

Determines the type of Program.
You can select either a normal Program or a drum Program.
The list of Programs changes according to the selected type.

Program Type

Selects the Program (Core Voice) assigned to the selected Zone.
You can select Programs with the ALPHA WHEEL or the [IN] / [DECREASE -] buttons.

Program

Select the FX Bus. You can select one of the effect buses from A to D, and select Bypass to disable effects.

FX Slots

You can select the arpeggiator (ARP) from among 8 types from A to H. Selecting None will disable the arpeggiator.

ARP Slots

Transpose adjusts the pitch of the selected Zone. You can adjust transposition in semitones using the ALPHA
WHEEL or the [IN], [DECREASE -] buttons.

Transpose

Pan adjusts the left and right stereo balance of the selected Zone. Default value is 0.

Pan

Set the volume for the selected zone (range 0-127).

Volume

Chapter 3.

Sound Mode

Summary of Contents for SP7 Grand

































































Search results

Summary of Contents for SP7 Grand

Reviews:

Related manuals for SP7 Grand

Brands by name

Popular brands

Kurzweil SP7 Grand, Musician'S Manual

Search results

Summary of Contents for SP7 Grand

Reviews:

Related manuals for SP7 Grand

Brands by name

Popular brands