7
3BA00221 • 2014-09-18 • Rev. 5
ersa i-CON2 & i-CON 2V
Description of the functions
■
Select [Change] by turning the i-OP.
■
Select the item from the [Language] menu.
■
Press the i-OP.
■
Select the required language by turning the i-OP.
■
Press the i-OP.
■
Select the item from the [** END **] menu and then
press the i-OP. The language has been changed.
3.3
Selecting the soldering iron
■
Select the required soldering iron by pressing the i-OP.
Pressing the i-OP again will turn on the soldering iron
connected to the left or to the right.
3.4
Setting the temperature
■
Set the required temperature on the soldering iron tip by turning the
i-OP.
■
Press the i-OP to confirm the setting.
3.5
Soldering
■
Perform a few trial runs.
If the result is not satisfactory, the parameters can be adapted to your
needs. To this regard, reed the following paragraphs.
