12
3BA00221 • 2014-09-18 • Rev. 5
ersa i-CON2 & i-CON 2V
8.
Warranty
© 08/2014, Ersa GmbH, 3BA00168
Heating and tips for soldering and unsoldering are subject to wear and are not covered by
warranty. Faults relative to materials or manufacturing must be reported in writing, along
with proof of purchase, before any return of goods, which must be authorised.
Ersa has taken great care in preparing this operating manual. Nonetheless, we cannot be
held liable whatsoever for the contents, the completeness and the quality of the informa
-
tion contained in this manual. The contents are prepared and continuously updated based
on the current situation.
All of the data published in this operating manual and all information on products and
processes have been supplied, to the best of our knowledge and belief, through the use
of technologically advanced tools. This information is not binding and does not relieve the
user of the requirement of running tests before using the device. We will not be held liable
whatsoever for any violations to the rights safeguarding third parties due to applications
and operating modes that are not expressly and preventively authorised in writing. We
reserve the right to make technical changes for the purpose of product improvement.
Pursuant to the regulatory framework, we are relieved from liability for direct damage,
indirect damage and damage to third parties deriving from the purchase of this product.
All rights reserved. This manual cannot, including partially, be duplicated, modified, broad
-
cast or translated into another language without written authorisation from Ersa GmbH.
Warranty
