Main Menu
The battery display is at the top left. After charging, it shows
the actual battery charge using 6 levels.
Next to that the line voltage is shown in all Broadband
modes of approxi/- 5%. This tells you if there is any
line voltage and its level so that you can distinguish
between an analog and ISDN connection. This also reveals
if the measurement is before or after a splitter.
The date and time are shown to the right.
Four selection positions are available in the main menu:
1. Broadband
2. Telephony (optional)
3. Copper Test (optional)
4. Setup
General Operation
In all the menus and submenus that have selection functions, the selectable parameters are either identified
with left and right arrows (◄ and ►) or without arrows. When the entry is marked with the left and right arrows,
you can switch between parameters by pressing the ◄ / ► buttons. When the entry is without the arrows,
press SEL (SELECT) to move to a submenu where you can change settings. Press ESC to exit and save the
selection in the menu. In the main menus, the previously selected menu item is saved. The next time you turn
on the device, the scrollbar is automatically set to the previously selected item.
Markings
disabled
activated, all inputs in order
> test possible
Red bar:
Input / verification
required!
< >
< >
< >
< >
?
!
Help
Date / Time
VoIP Parameters
a/b: 0,0 V
Caller ID
3
<Aus>
Authentication
1
Password
2
activated, complement inputs
> test possible
activated, correct entries
> test not possible
Operating Manual
KE3500
xDSL
M
ULTI
T
EST
9
KURTH ELECTRONIC Test & Measurement www.kurthelectronic.de [email protected]
Broadband
Help
Date / Time
Main Menu
a/b: 0,0 V
1
Telephony
Copper Test
Setup
2
3
4
p
q
UDP/RTP Port
UDP/RTP Port Range
6
7
<0>
User Agent
5
<5.060>
Registrar
Proxy
9
0
<Off>
Stun Server
8
<Off>
<Off>
Domain
4
Display Line voltage
