Connections
xDSL TEST Ports
The test port has one shielded RJ11 and one RJ45 port. This is the connection point for the test cables.
However, a connection cable for a modem can also be inserted. Do not plug in a RJ11 plug into a RJ45 jack.
This may damage the jack.
Ethernet Ports
The Ethernet ports have different functions. One serves as a download port in conjunction with the KE-
Manager for the stored measurements, or to upload any software upgrades. In modem mode and router mode,
it is the Ethernet test port to the customer devices.
USB Port
Port for USB connections. (Not yet activated)
Connections for copper test (optional)
For two two-conductor shielded measurement cables with device end, three-pin plug TF.
ISDN interface (optional)
ISDN and analogue connections RJ11 and RJ45.
LINE 1
LINE 2
A
A
B
B
GND
GND
GND
GND
TIP
TIP
RING
RING
USB 1
SD
100 Mb
Management
1000 Mb
xDSL Test Port
POTS
ISDN-U
ISDN-S
Ports upper side
ISDN Interface (optional)
Side ports
Bottom Ports
USB 1
SD-Card e.g. for longterm measurements.
Insert/remove SD-Card when the device is switched off!
Connections KECT3 for copper testing (optional)
Yellow LED: Link / Data
LED lights continuously:
Connection has been established
LED flashes: Transmit /
receive activity
Green LED:
Transmission speed
xDSL Test Ports RJ11 and RJ45
ISDN/Analog Test Ports RJ11 and RJ45
Headset connection
Power supply connection
Operating Manual
KE3500
xDSL
M
ULTI
T
EST
8
KURTH ELECTRONIC Test & Measurement www.kurthelectronic.de [email protected]
1 GBit/s Pots
for Ethernet-Tests
10/100/1000 MBit/s
Device Management Port
10/100 MBit/s
