background image

For your information...

You should carefully read the information in this manual before you use
your cooker hood. Here you will find important notes concerning safety and
how to use, look after and service your appliance so that it enjoys a long
service life.

Should a fault arise, please first consult chapter “What to do if trouble
occurs”. You can often remedy minor faults yourself and thus save un-
necessary service costs.

Always keep these instructions in a safe place and pass them on to new
owners for their information and safety.

Conditions of guarantee

The conditions of guarantee applicable for this product are subject to those
published by the representative in the relevant country.

Details regarding same may be obtained from the dealer from whom the
appliance was purchased. For claims under guarantee the sales receipt
must be produced.

Contents

Safety instructions . . . . . . . . . . . . . . .  13

For connections and functions
For operating your cooker hood
For operating the hood with stoves and heating appliances with a naked
flame

General advice . . . . . . . . . . . . . . . . . .  13

Your appliance at a glance. . . . . . . . . .  14

Using the hood . . . . . . . . . . . . . . . . . .  14

Before using your appliance for the first time 
Switching the lighting On / Off
Switching on the ventilation
Changing the ventilation setting
Switching the ventilation off
Switching on the delayed stop time
Cleaning interval for the fat filters 

Cleaning, care and maintenance . . . . . .  15

Cleaning the metal fat filters
Changing the activated charcoal filters (for recirculation mode)
Replacing a halogen lamp

What to do if trouble occurs . . . . . . . . .  16

Rating label

Installation  . . . . . . . . . . . . . . . . . . . .  17

Scope of delivery
Dimensions for installation
Installation preconditions 
Mounting a steel rear panel (optional) 
Fastening the hood body to the wall 
Connecting the external motor (KDEM 965.1)
Preparing the chimney
Installation of the exhaust channels
Electric connection
Installing the chimney
Screwing the control element tight
Inserting the metal fat filters
Mounting the ornamental glass

Guideline for extraction paths . . . . . . . .  20

12

KD 965.1 / KDEM 965.1

Summary of Contents for KD 965.1











Reviews: