Kuppersbusch KD 6210.0 GE, Instructions For Use And Installation

Page: 15 / 32

15
ENG
Index
Page
Description of the appliance 15
Instructions for use 15
Cleaning and maintenance 16
Problem solving 16
Sizes and specifications
17
Accessories supplied 18
Installation 18
Active charcoal filters 18
A Electronic programmer control box
with iluminated buttons to control
speed and light.
B Metal filters.
C Lamp with two bulbs - 20 W (G-4).
D, E Vertically adjustable tubecovers.
Switch on the extractor fan a few minutes
before you start to cook in order to ensure that
a steady air flow has been established before
fumes appear.
Allow the extractor fan to run for several
minutes after you have finished cooking
(between 3 to 5 minutes) in order to expel all
the grease from the outlet duct. This prevents
the return of grease, smoke and smells.
Proceed as follows:
1.- Choose the required speed.
2.- Press "timer". The light will begin to flash.
The duration of the “timer” is 10 min.
During the programmed time, fan speed can
be changed.
The intensive speed is autoprogramed and
will change to speed 2 after approximately 10
minutes.
Description of the appliance
Instructions for use
You may control the kitchen hood by
operating the controls as shown in the
diagram.
Programming timer