Kuppersberg GL4505, Technical Passport, Page: 16 / 44

16
Technical passporT english
dishwasher
INSTALLATION
ATTENTION
: If the appliance must be moved at
any time, keep it in an upright position; if absolutely
necessary, it may be tilted onto its back.
CONNECTING THE WATER SUPPLY
Adaptation of the water supply for
installation should only be performed by a
qualifi ed technician.
The water inlet and outlet hoses may be
positioned towards the right or the left in order
to achieve the best possible installation.
Make sure the dishwasher does not bend or
squash the hoses.
CONNECTING THE WATER INLET HOSE
Â
Run the water until it is perfectly clear.
Â
Screw the inlet hose tightly into position
and turn on the tap.
If the inlet hose is not long enough, contact a
specialist store or an authorised technician.
The water pressure must be within the values
indicated in the Technical Data table - otherwise
the dishwasher may be function properly.
Make sure the hose is not bent or compressed.
SPECIFICATIONS FOR THE CONNECTION
OF THE WATER SUPPLY HOSE:
WATER SUPPLY cold or hot (max. 60°C)
WATER INTAKE 3/4"gas
POWER OF WATER
PRESSURE
0,05 ÷ 1MPa (0.5 ÷ 10 bar)
7,25 - 145 psi
CONNECTING THE WATER OUTLET HOSE
Connect the outlet hose to a drain duct with
a minimum diameter of 2 cm A
Before connecting the water outlet hose to
the sink drain, remove the plastic plug B.
ANTI-FLOODING PROTECTION
Anti-fl ooding protection. To ensure fl oods
do not occur, the dishwasher:
Â
is provided with a special system which
blocks the water supply in the event of
anomalies or leaks from inside the appliance.
Some models are also equipped with the
supplementary safety device New Aqua Stop ,
which guarantees anti-fl ooding protection
even in the event of a supply hose rupture.
Under no circumstances should the water
inlet hose be cut as it contains live electrical
parts.
ELECTRICAL CONNECTION
WARNING: Under no circumstances
should the water inlet hose be cut as it
contains live electrical parts.
Before inserting the plug into the electrical
socket, make sure that:
Â
The socket is
earth
and complies
with current regulations;
Â
The socket can withstand the maximum
load of the appliance as shown on the data
plate located on the inside of the door (see
PRODUCT DESCRIPTION).
Â
The power supply voltage falls within
the values indicated on the data plate on the
inside of the door.
The outlet hose connection must be at a
height ranging from 40 to 80 cm from the fl oor
or surface where the dishwasher rests.