background image

11

english

Technical passporT

electric hob

The installer should bear in mind 

that the mixed appliance is the Y type. 
The rear wall, adjacent and surrounding 
surfaces must therefore be able to 
withstand an over temperature of 75 °C.

This appliance is not intended for 

use by persons (including children) with 
reduced physica l, sensory or mental 
capabilities, or lack of experience and 
knowledge, unless they have been given 
supervision or instruction concerning 
use of the appliance by a person 
responsible for their safety.

Children should be supervised to 

ensure tha t they do not play with the 
appliance.

eLeCTriCAL CONNeCTiON

The electrical connection has to 

be done in accordance with electrical 
and installation requirements of the 
Regulation.

Before proceeding with the 

connection, please, verify that

 

The power of the electrical 

system and the power of the outlets is 
adequate to the maximum power of the 
appliance  (see  the  identifi cation  label 
in the lower part of the body).

 

The outlets and all the 

electrical system should have an 
effi cient  connection  to  the  «earth» 
according with the Regulation. We 
disclaim all responsibilities for not 
observing such points.

 

If the appliance is not 

equipped with an input cable, connect 
to the dump with an adequate section 
cable (see Table 6) keeping the «earth» 
conductor  longer  than  ‘live»  ones, 
following the scheme of fi g. 12

FIG. 8

FIG. 9

FIG. 10

FIG. 11

Summary of Contents for FA6VS02

































Reviews: