Kuppersberg ESO 622, Technical Passport

Page: 40 / 80

39
ENGLISH TECHNICAL PASSPORT
Ceramic hobs
2. Select Power Function (P) and then
press power touch button (5). After
using the touch button you must lower
the continuous cooking power to the
desired level (for example 6). When the
automatic cook function is activated,
the «A» indication lashes and the
desired power level is shown on the
display.
SWITCHING THE AUTOMATIC COOK
START FUNCTION OFF
After at least 10 seconds have elapsed
since the beginning of the automatic
cook start function:
1. The hotplate must be selected.
2. Press touch button (5) till the
indicator reaches level P and the
automatic cook start function will be
deactivated.
TIMER
This function makes cooking easier, as
you do not need to be present during the
whole process: the hotplate(s) with the
timer on will switch off automatically
after the set time has elapsed. There
is a separate timer for each hotplate,
which allows all of the hotplates to be
timed simultaneously.
In these models you can use the clock
as a timer for the hotplates, setting
the time between 1 and 99 minutes.
All cooking zones can be programmed
individually and in a simultaneous
manner.
TIME SETTING FOR ONE HOTPLATE
1. The cooking zone to set the time
must be selected.
2. Select a power level for the hotplate
(from 1 to 9) using the touch button
or (5/4).
3. Press the clock touch button (10).
Timer indicator (1 1 ) will display 00. The
indicator (1 2 ) of the hob with timer will
lash (depending on the model). When
setting the time, the symbol lashes
on the power indicator (3)..
4. Immediately afterwards, enter a
cooking time between 1 and 99 minutes,
by using the touch button or (5/4).
When the power indicator (3) stops
lashing, it will start to count down
the time automatically. The respective
timed hotplate display (1 2 ) will continue
lashing. Or, when the countdown starts,
the corresponding power level and the
symbol will flash alternately on the
power indicator (3) of the respective
heating zone. When the clock reaches
01, it will switch counting down from
minutes to seconds.
Once the selected cooking time has
elapsed, the heating zone being timed
is turned off and the clock emits a series
of beeps for several seconds. The timer
indicator will display a flashing “00” next to
the hotplate that has been disconnected.
If you also wish to set time for another
hotplate, repeat steps 3 and 4.
If the switched-off heating zone is hot,
its indicator displays an “H” or otherwise
an “0”. To turn off the beeping sound tap
any touch button.
CHANGING THE PROGRAMMED TIME
To change the programmed time, you
must press the touch button of the