Kunzle & Tasin STORNELLO 7699950001, Operating Manual And Safety Instructions

Page: 6 / 24

6
Operating manual STORNELLO ®
Storage
It is advisable to store the machine without removing it from home. The trolley, provided with the machine, protects it
from moisture. Furthermore, you can form a three-trolley column to maximum one above the other.
If the machine is removed from the original and is not used for a long time, it should ensure that the pad does not
remain in contact with the ground. Then you need to set and return the machine to the original position, with flat disc,
by rotating the control wheel inclination towards "-" until the stop, to prevent the plate from being deformed and that
the subsequent processing found not optimal.
CAUTION
This device, when equipped with suction, is only for dry use and should not be used or kept on the outside in
humid conditions, while if devoid of the suction plate can be used with water.
In both cases, do not immerse the machine in water and do not wet the engine body. Store the machine in a dry
place, otherwise you may damage the machine. The storage temperature is from -20 ° C to 50 ° C.
Introduction
Safe and correct use
Please read carefully and in its entirety, this instruction manual before using for the first time the sander machine
STORNELLO
®
.
The operating manual contains important safety information and to prevent improper use of the machine. It can
answer many doubts or questions so you can work with the machine easily and safely. The removal of the safety
protections may involve risks to life and limb. Familiarize yourself with the machine before starting work.
If there is or is assumed a situation not described in this manual, please contact:
Kunzle & Tasin S.r.l.
The sander machine STORNELLO ® is suitable for sanding wood surfaces, metal and glass. Any other use without
the consent of the manufacturer is not allowed.
See also "unauthorized use."
Keep hands and clothing from moving parts!
The work area is protected by means of the base, which in addition to the support function and pressure adjustment
and tilt plate, sheltering from the abrasive disc.
Machine data plate
The following information can be found on the machine data plate:
1. Type of machine and system code
2. Motor power
3. Frequency
4. Supply voltage
5. Name of the manufacturer
6. Year of manufacture (see 12)
7. Insulation class
8. Weight
9. Rated current
10. Rated speed
11. Rated capacity
12. Serial number
- The first two numbers refer to the year of manufacture (16 = 2016)
- The second group of three numbers, indicates the day of the year the machine was manufactured (029 = January
29)
- The last two numbers indicate the progressive number of machines produced that day of manufacture (16 = sixteenth
machine).
1
2
3
4
5
6
8
7
9
12
10
11