Kunzle & Tasin STORNELLO 7699950001, Operating Manual And Safety Instructions

Page: 10 / 24

10
Operation manual STORNELLO ®
Prevention measures for users
Compliance with safety measures and warnings
HAZARD
Striking nails when sanding may generate an explosion or fire. Always ensure all nails
are sunk before sanding surfaces.
HAZARD Serious damage may occur if the power supply circuit trips repeatedly or is undersized.
Have the fuses, safety circuit and power supply line checked by an authorized electrician.
HAZARD Performing maintenance and/or repairing the machine when it is not fully disconnected
from the power supply may cause death due to electrocution. Disconnect the power
supply before carrying out any maintenance and/or repair work.
HAZARD
The use of this machine on a circuit which is not grounded may cause death due to
electrocution. Never disconnect or disable the grounding conductor. Consult an
electrician if the ground conductor is missing or it is suspected that the circuit is not
suitably grounded.
HAZARD The use of this machine with a damaged power supply cable may cause electric shock.
Check the power supply cable regularly for damage, such as splitting or wear and tear.
Do not use the machine if the power supply cable is damaged. Do not use the electric
cable to move the machine.
HAZARD
Injury or damage may occur if the sander machine runs over the power supply cable and
it becomes damaged. Keep the cable away from the lower part of the machine to avoid
contact with the tool or the abrasive. Always keep the power supply cable raised above
the machine.
HAZARD
The moving parts of this machine may cause serious injury and/or damage. Keep hands,
feet and loose clothing away from all moving parts of the sander machine.
HAZARD
Performing maintenance or replacing the dust bag may cause injury to the operator and/
or people nearby if the machine is connected to the power supply.
HAZARD Do not immerse the machine in water. The use of the machine provided with suction
(version WOOD and METAL standard) prevents the use of water near the sanding area,
while the version is not provided with suction (version GLASS and REMOTE) can be
used with little water and/or with water splashes near the sanding area. In any case, to
avoid contact between motor and water.
WARNING
Failure to comply with instructions on this machine or in this manual may cause serious
injury and/or damage. Read and comply with all safety instructions.
CAUTION
Injury or damage may occur if maintenance operation and repairs are carried out by
unauthorized personnel.
CAUTION The machine may become damaged if it is not kept in a dry building. Keep the machine
in a dry building.