Kunzle & Tasin STORNELLO 7699950001, Operating Manual And Safety Instructions

Page: 14 / 24

14
Operation manual STORNELLO
®
Prevention measures for users
Safety instruction for all operations
Further safety instructions for all operations
DANGER
- Never place your hand near the rotating accessory. Accessory may kickback over your
hand.
WARNING
- Do not position your body in the area where power tool will move if kickback occurs.
Kickback will propel the tool in direction opposite to the wheel’s movement at the point of
snagging.
WARNING - Use special care when working corners, sharp edges etc. Avoid bouncing and snagging
the accessory. Corners, sharp edges or bouncing have a tendency to snag the rotating
accessory and cause loss of control or kickback.
WARNING - Do not attach a saw chain wood carving blade or toothed saw blade. Such blades create
frequent kickback and loss of control.
Additional safety instructions for sanding operations
Safety Warnings Specific for Sanding Operations
WARNING - Do not use excessively oversized sanding disc paper. Follow manufacturers
recommendations, when selecting sanding paper. Larger sanding paper extending
beyond the sanding pad presents a laceration hazard and may cause snagging, tearing of
the disc or kickback.
Additional safety instructions for polishing operations
Safety Warnings Specific for Polishing Operations:
DANGER - Do not allow any loose portion of the polishing bonnet or its attachment strings to spin
freely. Tuck away or trim any loose attachment strings. Loose and spinning attachment
strings can entangle your fingers or snag on the workpiece.