Kühtreiber MAKin 250 DP, Instructions For Use Manual

Page: 22 / 36

22 | en
MIG/MAG - Adjustment of welding power
Synergic, Pulse and Double Pulse process - allows adjustment by welding cu -
rrent / material thickness / wire feed speed. the value is changed using the
n-coder ii. activation is performed by pressing the control n-coder one after
the other.
Welding current pulse double pulse
synergic manual N-coder ii
material thickness pulse double pulse
synergic manual N-coder ii
Wire feed speed pulse double pulse
synergic manual N-coder ii
MIG/MAG - setting the PRe-GAs Function
the function serves to provide a protective atmosphere before the arc is ig -
nited. pressing the control button on the torch activates the function that is
active for the set time. after the set time has elapsed, the welding arc ignites.
to activate, press the FuNctioN (Fn), select button the function is performed
by sequentially rotating the control n-coder i, setting the function parameter
by pressing the control n-coder ii.
pulse double pulse
synergic manual N-coder ii N-coder i
MIG/MAG - setting the soFT sTART function
(approach speed / inlet of wire)
the function is used to start the welding process smoothly and eliminates
the initial spatter of metal when the arc is ignited. the function is activated
by pressing the FuNctioN button (Fn), the function is selected by rotating
the control n-coder i in sequence, the function parameter is set by pressing
the control n-coder ii.
pulse double pulse function
synergic manual N-coder ii N-coder i
MIG/MAG - setting the buRN bACK function
Function to prevent the wire from sticking to the weld. When welding is com -
plete, the wire feeder stops but the arc is still burning for some time. acti -
vation is performed by pressing the FuNctioN button (Fn), the function is
selected by rotating the control n-coder i sequentially, the function parameter
is set by pressing the control n-coder ii.
function pulse double pulse
synergic manual N-coder ii N-coder i