SERVICE MANUAL AS55X
55Xseries_manual_V3.22 (18-08-15)
www.kuhnt.com
89
Display number -> GSM network
Here, you can generally submit or suppress your caller ID (CLIP / CLIR).
The setting “As on wired side” means that the own SIM number is displayed
if a CLIP from the wired side is present.
Default value:
Network setting
Notice: The weighting of the CLIP settings is as follows. The lowest priority is
the setting in general GSM settings (display number -> GSM Network), then
in individual call setup, and the highest setting is the CLIP/CLIR-Code in
general GSM settings.
GSM channel restart timer
In some cases it can happen that a logged-in module is no longer visible in the
network. To prevent this case, you can restart each GSM module.
So the module log in again after the chosen period. If you select “Off”, the module
will not be restarted.
This is the global default value for all channels. For a precision tuning to each channel
you can use “GSM settings / GSM channels”.
Default value:
after 8 hours
Notice: A restart will never be triggered while a GSM connection or a call-
setup is in progress.
GSM channel restart mode
In some cases it happens that a logged-in module is no longer visible in the network.
To prevent this case, you can restart each GSM module.
Here you can select the global setting referring to the restart mode of the GSM
channels. You can choose “without GSM connection”. Then the AS55X will restart
after the last call or call setup. If you choose “unconditional” the AS55X will restart
definitively after the chosen period.
Default value:
Without GSM connection
Notice: A restart will never be triggered while a GSM connection or a call-
setup is in progress.
Summary of Contents for AS55 Series
Page 1: ...AS55X Series SERVICE MANUAL ...
Page 2: ......
Page 18: ...SERVICE MANUAL AS55X 16 www kuhnt com 55Xseries_manual_V3 22 18 08 15 ...
Page 173: ...www kuhnt com 1 Personal memo ...
