SERVICE MANUAL AS55X
55Xseries_manual_V3.22 (18-08-15)
www.kuhnt.com
157
8.8.2
Problem solution
WLL: Immediate work after device reset
After a device reset with the reset button it is no longer necessary to download
configuration with the service software. Standard phone and FAX operations are
working immediately. But if the SIM requests a PIN, it must be entered by the DTMF
command via the connected phone.
Duplication of read short messages via short message server
There are conditions that can result into duplication of read short messages via the
short message server in devices that use the GSM module TC63i. This problem is
fixed.
Instability after reception of a flood of broadcast messages
After reception of a great mass of broadcast messages (more than
200) without any gap, the AS55X could get instable. This had affect to
all LAN functions, VoIP audio stream was chopped in that case. This
problem is fixed with firmware 3.12.
8.9
Release 3.13
8.9.1
New and improved features
Path replacement
Path replacement for ISDN QSIG applications is implemented, please
ask the customer support for configuration.
Use any channel if selected group not ready
If for an outgoing call to GSM all channels of the by routing selected
GSM group are busy or not registered, this call can be handled by any
other available GSM channel. This feature has to be configured in
'Global call-setup'.
DHCP active after reset
After clearing configuration with the reset button, the internal DHCP
server is now active. Hence, after reset the AS55X can also be
accessed from computers without fixed IP addresses and without any
additional settings to their network adapters if no other DHCP server
is available in the network.
PH8 supported
Summary of Contents for AS55 Series
Page 1: ...AS55X Series SERVICE MANUAL ...
Page 2: ......
Page 18: ...SERVICE MANUAL AS55X 16 www kuhnt com 55Xseries_manual_V3 22 18 08 15 ...
Page 173: ...www kuhnt com 1 Personal memo ...