Kuhnt AS55 Series, Service Manual

Page: 140 / 173

SERVICE MANUAL AS55X
138 www.kuhnt.com 55Xseries_manual_V3.22 (18-08-15)
6 Installation
6.1 Set SIM PIN
If your inserted SIM Cards need a PIN to log in the wireless network, you have to enter it
here. You can enter a different SIM-PIN for every channel. If you use a SimSwitch, it is
mandatory to use the same (or no) PIN for all SIMs in one channel.
To save the PIN in AS55X, enter it, select the channel and press “Apply”. The PIN will be
saved in the device and NOT in the configuration data. If you use this configuration data in a
second device or backup it, the PINs will not be saved. You have to enter the PINs again.
If you enter a wrong PIN, the LED will flash five times red. If you do this twice, the LED will
flash six times. The third and last attempt is not possible in AS55X. Therefore you have to put
your SIM in a plain mobile phone. If you enter no PIN but the SIM requires one, the LED will
flash four times. These SIM messages you can also check in Services menu (see 7.2).
6.2 Set password local access
Here you can assure your AS55X against unauthorized access with the
AS55X-Service-Software via USB. By default no password is set.
To set a password for first configuration, leave the current password blank and type in the
new password inclusive the verification. To delete a current password, type in your old
password and leave the other two fields blank.
The password is saved in the AS55X and NOT in the configuration data.
Notice: If you lose your password, it can be cleared by the manufacturer only.
6.3 Set password remote / LAN access
Here you can protect your AS55X against unauthorized access via LAN and remote access
with the AS55X-Service-Software via GSM. Defining the username and password is
recommended. To avoid any unwanted LAN or GSM access, switch off the remote access
switch at the front (AS551) or back (AS550) of your gateway. By default no username and no
password is set.
To set a username/password for first time, leave the current password blank and only type
in the new password inclusive the verification. To delete a current password, type in your old
password and leave the other two fields blank. For changing the username the method is the
same.
The username and password are saved in the AS55X and NOT in the configuration data.
Notice: If you lost your username and password, it can be cleared by the
manufacturer only.