4 - 5
Programming
Program time cam.
Set encoderr speed reduction (gear function).
Copy program.
Display status and error messages of the cam control unit.
Program new cams (using the numeric key pad).
Cancel function without accepting the entries (escape).
(Reserved for additional functions).
Teach-in (program cams using the current encoder position).
Show/change key code, special functions (Control).
Check present cam and edit if necessary.
Shift key (upper case switch) for double function keys (indiated
as SHIFT in the display).
In devices with version numbers < 2.0, the Shift key is
labelled like this:
ñ
Enter key (Return). Accepts entries and stores them if necessary
(indicated as ENT in the display).
In devices with version numbers < 2.0, the Enter key is
labelled like this:
↵
Summary of Contents for PG 674
Page 6: ...Contents 4 Table of contents ...
Page 18: ...3 6 Operating terminal PG 674 ...
