4 - 11
Programming
4.6.7. Choosing a program
The cam control unit can store several programs:
- KUAX 674: programs 0...7
- KUAX 673: programs 0...31
You can always select one of these programs for programming
and/or operation.
Apart from the actual programs, the operating terminal has its
own program memory which is addressed under number 32.
This is used i.e. for copying a program from one controlling de-
vice to another.
There are various reasons for changing the program:
-
to write a new program;
-
to modify an existing program;
-
to copy a program from one controller to another or
-
to let the machine run with another program.
You choose the program either via the connected programming
device or via the assigned inputs (see instruction manual of the
controller).
4.6.7.1. Giving access to the choice of program function
In the open operating mode (see "4.4. Operating modes...") you
are basically allowed to change from one program to another
using the operating terminal.
In addition to this the programmer can stipulate whether or not
this may also be allowed in the restricted operating mode. You
can only specify this when in the open operating mode.
See the next page for how to assign authorization.
Summary of Contents for PG 674
Page 6: ...Contents 4 Table of contents ...
Page 18: ...3 6 Operating terminal PG 674 ...
