KUHN Venta 3030, Operator'S Manual

Page: 54 / 136

Venta 3030-3530-4030
52
7. - Putting into service
RN034AGB D
Seed Drill
- Connect the hydraulic connections on the
headstock of the rotary harrow.
7.4.1 Lift sensor adjusment
Before the first use of the equipment combination,
the work position sensor must be programmed.
- Check that coulter and scraper bar are parallel.
The lift sensor enables stopping the metering
unit rotation when lifting the machine on
headlands.
- Lift the machine with the tractor's three point
linkage.
• The articulated plate (1) must be opposite sensor
(2) in machine raised position VENTA 1030.
- Determine the upper position of the mobile
indicator (1) when the machine is lowered using
the adjusting screw (3).
• The adjustment depends on the desired reaction
time of the sensor in the event of change of
condition.
- Lower the machine using the tractor lift linkage.
3
1
2
Only work in straight lines. Lift the machine
to turn.