Instructions for work
Mower conditioner
FC4000RG
39
2. Adjustments in working position
Cutting height
The height can be adjusted from 26 to 100 mm (1" -
4’’). Centralized adjustment by means of a pitch angle
adjustment rod fitted with a graduated scale (1).
To adjust the cutting height:
- Insert handling rod (2).
- Turn clockwise to reduce cutting height (a).
- Turn counter-clockwise to increase the cutting
height (b).
- Remov handling rod (2).
Place the machine on flat ground.
The cutting height is adjusted with the
machine attached, hitch pins at
600 mm (1’11’’) from the ground.
The maximum cutting height (L1 = 100 mm (4’’))
is obtained when the discs are parallel to the
ground.
The minimum cutting height must not be below
(L2 = 26 mm (1’’)).
Too low a cutting height can lead to:
- Excessive disc and knife wear.
- Crop being contaminated by soil.
- Delay in regrowth.
1
2
L1
L2
Summary of Contents for FC 4000 RG
Page 2: ......
Page 73: ...Appendix Mower conditioner FC4000RG 71 T Axle loads Tractor only T _______kg T _______kg...
Page 78: ......
Page 79: ......
