KUHN EL 131, Assembly & Operators Manual

Page: 30 / 48

- 28 -
11° SEMI-AUTOMATIC HITCH
(photo A)
Kit no. 120 9110 for Cat. 2 (Fig. B)
Kit no. 120 9120 for Cat. 3 (Fig.C)
The semi-automatic linkage consists especially of
a cross-shaft (L), 2 linkage hooks (M) and 2
bushes (N).
The cross-shaft (L) should be fitted to the tractor
lower links, and the linkage hooks (M) should be
fitted to the machine chassis in place of the standard
lower attachment brackets by means of the axles
and hardware provided with the kit, as seen on
photo A.
Do not forget to install the 2 spacers (N) (photo A).
12° LENGTHENED LOWER LINK BRACKET
Code 120 6500
These brackets can be fixed in place of the original brackets using the same fixing elements. They are designed
to provide a bigger space between the tractor rear wheels and the machine to make the fixing of accessories
such as front caster wheels, levelling bar and track eradicators easier (machine moved back by 10 cm / 4"
compared to the original brackets).
13° CRUMBLER ROLLER SCRAPER
2,50 m Kit no. 123 7200
3,00 m Kit no. 123 7210
The EL 131 with a crumbler roller can be fitted with a
roller scraper (D) with cleaning plates (P) which rest
against the outer and intermediate roller support
rings.
The scraper increases the efficiency of the roller
when working in wet conditions, minimising clogging.
The scraper connecting tube (D) is fitted to support
arms (B) by means of 4 screws (U). Cleaner plates
are individually adjustable by means of their elon-
gated mounting holes (photo 29).