KUHN EL 131, Assembly & Operators Manual

Page: 34 / 48

- 32 -
MAINTENANCE
1° LUBRICATION
. PTO Shaft :
Grease PTO shaft telescopic tubes and universal
joint bearings every 8 hours of use and after each
season with SHELL Multi-purpose grease NLGI
GRADE 2 (2 grease nipples).
. Roller :
Grease the bearing housings at each roller end
every 20 hours with SHELL Multi-purpose grease
NLGI GRADE 2 until the old grease spills out of the
housing (2 grease zerks E) (photo 12, page 18).
. Gearboxes :
Oil must be changed after the first 10 hours and
thereafter every 100 hours. Check oil level regu-
larly (at least once a week).
. Lubricate all pivot joints regularly with SHELL oil.
Before carrying out any operation such as maintenance or adjustment on the
machine, stop the tractor engine, remove ignition key and wait for the rotors to stop
before leaving the tractor.
GEARBOX SIDE GEARBOX
Filler and breather plug item 1 item 2
Drain plug item 4item 5
Level plug item 6 item 7
Oil quantity:SHELL SPIRAX 90 EP 6 litres/10.5 Imp.Pint/12 US Pint 3,5 litres/6.3 Imp.Pint/7 US Pint
FOR TROUBLEFREE OPERATION OF YOUR MACHINE,
WE RECOMMEND THE USE OF SHELL PRODUCTS.