Kubota ZD221, Operator'S Manual

Page: 79 / 95

PERIODIC SERVICE 62
ENGLISH
SERVICE AS REQUIRED
B
Replacing Fuses
Replacement of the fuse
1. Raise the operator's seat.
2. Remove the blown fuse.
3. Place a new fuse of the same capacity in position.
A
If the new fuse happens to blow out within a short time,
contact your dealer for inspection and repair. Never
"jump" the fuse with wire or foil, or install a larger
capacity fuse than is recommended.
C
Protected circuit
B
Checking and Replacing Blade
To avoid personal injury:
A
Be sure to stop the engine and remove the key.
A
Blades may be sharp. When you handle blades,
wear heavy gloves or wrap end of blade with a
rag.
C
Checking
The blade cutting edges should be kept sharp at all times.
Sharpen the cutting edges, if they resemble blade (B).
Replace the blades if they appear similar to blade (C).
(1) Fuse location
(2) Slow blow fuse
FUSE NO.
CAPACITY
(A)
Protected circuit
(1)
20 A Engine stop
15 A Charge system
15 A Main system
15 A Aux. outlet
10 A Control system
(20 A) *(Work light)
(2)
Slow blow fuse
50 A
Check circuit against
wrong battery connection
*Option: The fuse should be in only when the work light
is attached.
(A) New blade
(B) Worn blade
(C) Cracked blade