Kubota ZD221, Operator'S Manual

Page: 71 / 95

PERIODIC SERVICE 54
ENGLISH
EVERY 150 HOURS
B
Changing Gear Box Oil
To avoid personal injury:
A
Be sure to stop the engine and remove the key
before changing the oil.
1. To drain the used oil, remove the drain plug and filler
plug at the gear box and drain the oil completely into
the oil pan.
2. After draining reinstall the drain plug.
3. Remove the oil level check plug.
4. Fill with the new oil up to the check plug port.
(See "LUBRICANTS AND FUEL" in "MAINTENANCE"
section.)
5. After filling reinstall the check and filler plugs.
EVERY 200 HOURS
B
Changing Engine Oil
To avoid personal injury:
A
Be sure to stop the engine and remove the key
before changing the oil.
A
Allow engine to cool down sufficiently; oil can
be hot and may cause burns.
1. To change the used oil, remove the drain plug at the
bottom of the engine and drain the oil completely. The
used oil can be drained out more easily if the engine is
warm.
2. Fill with the new oil up to the upper notch on the
dipstick.
3. To check the oil level. Remove the dipstick, wipe it
clean, insert it and draw it out again. Check to see that
the oil level is between the two marks.
(1) Drain plug (Bolt)
(2) Check plug (Bolt)
(3) Oil filler plug
(1) Drain plug