Kubota ZD221, Operator'S Manual

Page: 46 / 95

29 OPERATING THE MOWER
ENGLISH
A
Never allow roller to contact the ground continuously
as premature roller wear may develop if set
incorrectly.
A
Anti-scalp rollers must maintain a minimum clearance
of 6 mm (1/4 in.) to the ground.
Reference
A
Set the position for a recommended ground clearance
of 19 mm (3/4 in.).
(Figure shows a setting position of cutting height 2.0"
or 2.25")
(1) Anti-scalp roller (Front)
(2) Anti-scalp roller (Rear)
Cutting height
inch (mm)
Position of bolts
(Ref.) Ground
clearance
between rollers
and the ground
1.00" (25) *2
1
6 mm
1.25" (32) *3 12.4 mm
1.50" (38) 19.0 mm
1.75" (44) 25.4 mm
2.00" (50)
2
19.0 mm
2.25" (58) 25.4 mm
2.50" (64)
3
19.0 mm
2.75" (70) 25.4 mm
3.00" (76) *1 (31.8 mm)
3.25" (83) *1 (38.2 mm)
3.50" (89) *1 (44.6 mm)
3.75" (95) *1 (51.0 mm)
4.00" (102) *1 (57.4 mm)
4.25" (108) *1 (63.8 mm)
4.50" (114) *1 (70.2 mm)
4.75" (121) *1 (76.5 mm)
5.00" (127) *1 (83.0 mm)
*1. For cutting heights above 3.0". The anti-scalp
rollers will still be effective against scalping.
*2. Cutting height 1" is a ground clearance of 6 mm.
*3. Cutting height 1.25" is a ground clearance of 12.4
mm.