MAINTENANCE
58
ENGLISH
EVERY 150 HOURS
B
Changing Gear Box Oil
To avoid serious injury or death:
A
Be sure to stop the engine and remove the key
before changing the oil.
1. To drain the used oil, remove the drain plug and oil
inlet plug with gauge at the gear box and drain the oil
completely into the oil pan.
2. After draining reinstall the drain plug.
3. Remove the oil level check plug.
4. Fill with the new oil up to the check plug port.
(See "LUBRICANTS, FUEL AND COOLANT" in
"PERIODIC SERVICE" section.)
5. After filling reinstall the check plug and oil inlet plug
with gauge securely.
EVERY 200 HOURS
B
Changing Engine Oil
To avoid serious injury or death:
A
Be sure to stop the engine and remove the key
before changing the oil.
A
Allow engine to cool down sufficiently; oil can
be hot and may cause burns.
1. To change the used oil, remove the drain plug at the
bottom of the engine and drain the oil completely. The
used oil can be drained out more easily if the engine is
warm.
2. Fill with the new oil up to the upper notch on the
dipstick.
3. To check the oil level. Remove the dipstick, wipe it
clean, insert it and draw it out again. Check to see that
the oil level is between the two marks.
(1) Drain plug
(2) Oil inlet plug with gauge
(3) Seal washer
(4) Gear case
(A) Oil level is acceptable within
this range.
(B) Oil level
(1) Drain plug
