9
MOWER MOUNTING
ENGLISH
MOWER MOUNTING
MOUNTING THE MOWER DECK
To avoid serious injury or death:
A
Park the machine on a firm and level surface.
A
Apply the parking brake.
A
Stop the engine and remove the key.
1. Before mounting the mower deck, raise the lift links to
the full up position.
2. Adjust the cutting height control dial to 1 in. position.
3. Change the direction of the front tires as shown in the
figure.
4. Place the mower deck at the right side of the machine.
A
RCK60P only: For easy installation, set the anti scalp
roller as shown below.
5. Slide the mower deck under the machine, and make
sure that the mower gear case is placed properly in the
center of the machine.
6. Adjust the lift pedal to the lowest position and pull
down the lift links.
7. Attach the lift links to the mower deck with attaching
hardwares.
8. Install universal joint.
Pull back the coupler of the universal joint.
Push the universal joint onto the PTO shaft until the
coupler locks.
(1) Anti scalp roller (Front, swivel type)
(2) Anti scalp roller (Rear, bolt shift type)
(3) Anti scalp roller (Rear, pin shift type)
(1) Lift link
(2) Clevis pin, Plain washer, Snap ring
