39
PERIODIC SERVICE
ENGLISH
LUBRICANTS, FUEL AND COOLANT
Note
*1 Oil amount when the oil level is at the upper level of the oil level gauge.
*2 The product name of KUBOTA genuine UDT fluid may be different from that in the Operator's Manual depending
on countries or territories. Consult your local KUBOTA Dealer for further detail.
A
To prevent serious damage to hydraulic systems, use only KUBOTA genuine fluid or its equivalent.
Place
Capacities
Lubricants
ZD1011
,
ZD1021
Fuel
23 L (6.1 U.S. gals.)
No.2-D diesel fuel
No.1-D diesel fuel if temperature is below
-10
(14
)
Coolant
2.7 L (2.85 U.S.qts.)
Fresh clean water with anti-freeze
Recovery tank
0.25 L (0.26 U.S.qts.)
Engine crankcase
3.5 L (3.7 U.S.qts.)*1
Engine oil: API service
Classification CF or better
Above 25
...SAE30, SAE10W-30 or 15W-40
(77
)
0 to 25
.........SAE20, SAE10W-30 or 15W-40
(32 to 77
)
Below 0
........SAE10W, SAE10W-30 or 15W-40
(32
)
Transmission case with filter & hose
Rear axle gear case (RH &LH)
7.5 L (7.9 U.S.qts.)
KUBOTA SUPER UDT-2 fluid*2
Mower gear box
0.4 L (0.42 U.S.qts.)
Engine oil: API service Classification SH, SJ or higher
SAE10W-30
Greasing
No. of greasing points
Capacity
Type of grease
Front axle
2
Until grease
overflows
Multi purpose
EP2 Grease
(NLGI Grade No. 2)
Front wheel
2
Parking brake lock pedal
1
Front lift arm
2
Universal joint
3
Seat adjuster
2
Cable (throttle cable, mower lift cable)
3
Moderate amount
Oil
Motion control lever pivot bushing,
and contact position
6
[MOWER]
Universal joint
3
Until grease
overflows
Multi purpose
EP2 Grease
(NLGI Grade No. 2)
Three spindle shafts
3
Belt tension pulley
1
Belt tension pivot
1
Anti scalp roller
1
Front anti scalp roller pivot boss
2
