Kubota M5-091, Operator'S Manual

Page: 76 / 176

OPERATING THE TRACTOR 52
5. Press the switch to the (A) or (B) side and set the
speed.
Pressing and holding down the switch will cause the
speed to change continuously. Pressing and releasing
the switch changes the speed by 10 rpm each time.
Set the desired engine speed while watching the
speed display.
6. If the switch is released and not operated for 4
seconds, a continuous buzzer sound occurs and the
setting is completed.
7. Follow the same procedure as for the (A) side to set
the speed for the switch (B) side.
A
The set speeds will be stored even after the engine is
stopped.
C Canceling the setting
Any of the actions below will cancel the RPM dual memory
settings.
1.
[Switch (A) side]
When the memory speed is engaged, press the switch
(A) again to cancel.
[Switch (B) side]
When the memory speed is engaged, press the switch
(B) again to cancel.
When the memory speed is canceled, the speed will
return to the speed that is determined by the hand
throttle lever (foot throttle).
(When the switch is pressed, the LCD will display the
engine speed that is in effect after memory speed is
canceled.)
2. Return the hand throttle lever to the lowest speed
position.
3. Turn the key switch to "OFF".
3. Press the switch (A) side
and then release the
switch.
4. Again press and hold
down the switch (A) side
(2.5 seconds) until the
buzzer sounds, then
release the switch.